(ATTENTION: CODE OFFICIALS, INSPECTORS, SPECIFIERS, AND FIRE MARSHALS.)
The 3M FIP 1-Step foam meets IBC, IRC, IFC, IPC, IMC, NFPA 5000, NEC (NFPA 70), NFPA 101, and NBCC and is tested to ASTM E 814/UL 1479.
Finally a UL fire rated 1-step foam for commercial construction that's easy to install and will not run down the wall. The 3M intumescent foam requires no mineral wool or sleeves and covers a wide range of applications in both horizontal and vertical applications. Just foam in place and your done!
3M's Fire Barrier Rated Foam (FIP 1-Step), is a smoke, sound, and firestopping foam for wall and floor penetrations. Premium two-part, easy-to-handle formulation. Expands up to five times yielding 116 cubic inches during installation and bonds to most construction substrates including, but not limited to, concrete, metal, wood, plastic and cable jacketing. Dries to a re-enterable flexible solid. During a fire, the product maintains a tight firestop against smoke and flame.
Benefits for the 3M FIP 1-Step:
-Is not runny during application.
-Cures soft allowing for vibration and movement.
-One 12.85 fl.oz Foam cartridge = 6 x (10.1oz) CP25 tubes.
-Complete some installations from one side of the opening.
-Finish the job up to 3X faster than traditional methods.
-Less product to order.
-Complex openings made easier and faster.
-Re-Enterable
-Virtually No Waste, cured product is reusable in another penetration
Contact me at ron@ricsllc.com for more information!
![](https://s2.save4k.ru/pic/mHz3JNgnLqk/maxresdefault.jpg)