Visit us at [ Ссылка ]
Do it yourself Mazda keyless entry remote programming. Works for most Mazda remotes. One working key is required for programming.
THIS WILL NOT WORK FOR THE SMART KEY SYSTEM
NOTE: A maximum of 3 key remote transmitters can be programmed.
Obtain all key remote transmitters.
NOTE: Any existing key remote transmitters not used during programming will become inoperative.
Remove key from ignition switch.
Close all doors.
Open driver's door.
Carry out the following procedure within 24 seconds:
Turn ignition switch ON and back to LOCK position 3 times.
Press and release driver's door courtesy light switch 3 times.
Ensure doors lock and unlock.
If not, wait 40 seconds and repeat procedure starting with driver's door already open.
Press UNLOCK button of each key remote transmitter twice.
Ensure doors lock and unlock after each operation.
If not, proceed as follows:
Press and release driver's door courtesy light switch once.
Ensure doors lock and unlock twice.
Repeat procedure starting with driver's door already open.
