Pro Taper 1-1/8 Inch Universal Rubber Mount Kit for Honda CR CRF Kawasaki KX
Amazon Product Link: [ Ссылка ]
Pro Taper Universal Rubber Mounted Handlebar Mount Kit will fit 1-1/8 Inch bars. These will not fit top triple clamps where the top bar mount is cast into the top triple clamp. These will replaces OEM rubber bar mounts to accept 1-1/8" handlebars only. Their reversible design provides forward or rear mounting with 4mm offset and are precision CNC machined aircraft grade aluminum.
Top reviews from the United States
I had some minor problems with installing this on a DR650
So pictured here are the stock dr650 mounts, the bolts that go through the original rubber bushings are smaller bolts than what is supplied with the pro taper risers. I had to drill out the stock rubber/metal bushings to make it work. Also the supplied bolts that fit into the risers aren’t hex shaped. If you need to supply a longer bolt of your own you’ll have to modify the hex head with a grinder. I later added a platform to plug in a gps and a cell phone, the maybe 3/8 steel that is installed between the risers was too large for the original bolts supplied with the pro taper risers. I could not find a threaded bolt that was long enough and had enough threads in metric. I found a 7/16 bolt with the appropriate threads and that worked fine although I now have a 5/8 hex head on my Japanese bike. No real problems installing if you’re willing to do some head scratching, have a drill press and an angle grinder you should have too much issue. People that don’t have any of these tools, you will at the minimum have to have the original handlebar bushings bolt hole enlarged to fit the new larger bolts. I see most people are using the smaller stock bolts. This is unacceptable in my opinion. You can do that and many people have, but the stock bolts are a sloppy fit. It’s just not right in my opinion.
Ok, in the photo the two bolts pictured, the first is original and 10mm, the next is what’s supplied with the pro taper mounts and they are 12 mm (you already see the problem) and my final solution was to supply my own 7/16 inch which is approximately a hair over 11mm. Hopefully this makes sense to someone installing on a dr-650 on other bikes installation may be much easier.
![](https://s2.save4k.ru/pic/mTLXol5MZZ8/maxresdefault.jpg)