Hello, friends!
In today's video I am going to show you how to use the EM012 ESL emulator by ABRITES to start and drive away a Mercedes-Benz C207 with a defective ESL. The procedure also requires the new ZN076 USB IR adapter, with which the EZS password extraction is faster than before, and will resolve your problem for minutes.
First, you need to locate the ESL connector of the vehicle, which can be found under the above pedal cover. Connect AVDI to your laptop and vehicle. Then connect the EM012 to the ESL connector. Finally, plug your ZN076 USB IR adapter in the USB port of your laptop and start the software.
Enter the DAS Manager in the ABRITES Diagnostics for Mercedes-Benz vehicles, read and save the EZS data.
!Keep in mind that I have already gotten the EZS password (see the previous video: [ Ссылка ]), and that's why I have it already when reading the EZS!
After getting the password and saving the data, save the coding, as well. You are going to need it. After that, personalise the EZS and go on to the ESL. Do NOT activate the EZS, do NOT put a working key or the USB IR adapter in the ignition, leave it inactive. If you activate it now, it will ruin the procedure and you will have to start all over again.
Now, to the ESL.
The ESL is not functioning at the moment, so we need to firstly read its data, then virginize it. The final step is to personalise it (it will get the data from the EZS). And you are ready to start the car!
Watch the video, let me know how you like it. Leave a like and a comment, subscribe for more tutorials! Ring the bell to get notified for each upload.
And most importantly, have fun!
AVDI FAN
Hardware:
1. AVDI - [ Ссылка ]
2. EM012 ESL Emulator - [ Ссылка ]
3. ZN076 UBS IR Adapter - [ Ссылка ]
4. CB100/106 - [ Ссылка ]
5. CB104 - [ Ссылка ]
Software:
1. AMS - [ Ссылка ]
2. MN032 - [ Ссылка ]
