Hot Spring offers four hot tub cover lifter options, from dual pneumatic shock to economical easy glide systems. For an economical cover removal system, get the Lift ‘N Glide® that is designed to fit with your Hot Spring marine vinyl cover. This value cover lifter does the job of helping you remove your hot tub cover with ease. The gliding action eliminates the need to struggle with manual removal of your cover, keeps your cover off the ground so it’ll last longer, and is easy to use. The Lift ‘N Glide is one of four cover lifters from Hot Spring and this model requires 14” clearance
To use the Lift ‘N Glide cover lifter:
1. Unlock the spa straps.
2. Reach between the hot tub and cover to break the seal between them.
3. Push the cover back until it stops.
4. Fold the cover over, lift it and it will engage into place.
5. For safety purposes, insert the locking pin to prevent accidental closure.
6. When you are finished using the hot tub, remove the pin, disengage the cover, close and lock.
Be sure to contact your local Hot Spring dealer to order your replacement cover when you see signs of wear on your spa cover.
![](https://s2.save4k.ru/pic/mkASnfkbvA0/maxresdefault.jpg)