In this video you will learn how to do wiring connections of instant geyser . First of all you have to known the color code of wires as green is for earthing , red is for phase and black is for neutral. Secure the wiring harness on the geyser assembly with the help of support provided by the company.
First we do the connection of earthing wire, you can connect it to any metal part like nut bolt . Then do the connection of neutral wire to any one terminal of heating element . Now connect the phase wire to the thermostat and the other end of thermostat to the heating element other terminal. These connections will help the geyser to run when supplied electricity.
After the above connections we connect the indicators . First connect the green one which ON when heating is in progress , we connect the wires of green indicator to the heating element terminals , one act as phase and other as neutral.
To connect the other indicator red or orange , there are two ways , in first one if we connect the indicator to thermostats both ends then it will only glows when heating is done,
and for second way we connect one end to the thermostat and other to the neutral terminal of heating element in this case indicator glows continuously.

TOOLS AND OTHER THINGS USED
- SCREWDRIVER ( BUY LINK - [ Ссылка ] )

MY GADGET AND YOUTUBE EQUIPMENT'S
- MOBILE - GLAXY GRAND 2
- TRIPOD ( BUY LINK - [ Ссылка ] )
- LOW BUDGET TRIPOD ( BUY LINK - [ Ссылка ] )
- MOBILE HOLDER ( BUY LINK - [ Ссылка ] )
- BEST MICROPHONE ( BUY LINK - [ Ссылка ] )
- ANOTHER GOOD MIC ( BUY LINK - [ Ссылка ] )
- LOW BUDGET MIC ( BUY LINK - [ Ссылка ] )
- TRIPOD WITH MOBILE HOLDER AND MIC COMBO ( BUY LINK - [ Ссылка ] )


HOPE THIS VIDEO IS HELPFUL FOR YOU
THANK YOU FOR WATCHING

MORE VIDEOS
How to clean instant geyser - [ Ссылка ]
How to test geyser element if its good or bad - [ Ссылка ]
How to change geyser heating element/rod - [ Ссылка ]
How to drain geyser - [ Ссылка ]
How to repair geyser - [ Ссылка ]

свернуть