In this guide I show you a common error that occurs when trying to install WLED on a ESP32 and how to fix it. Plus I show you the correct way to flash your ESP32 using the WLED website.

Whether you're new to ESP32 or looking to enhance your lighting projects, this step-by-step guide has you covered.

09:41 NOTE! THE DEFAULT PASSWORD for WLED is actually wled1234 (sorry)


🔗 Timestamps:

00:00 - Introduction
02:10 - Method that didn't work for me (1st error)
04:56 - Method that should work for me (2nd error)
07:15 - Method that works for me (3rd times a charm Successful Flash)

🛠️ Tools and Resources Mentioned:

Hardware Required for Tutorial (I get a small % at no extra cost to you if you buy something using the links below, I appreciate your support.)

- Computer with Windows and at least 1 spare USB port.
- ESP32 Development Board - [ Ссылка ] (the one I used in this video)
- Micro USB Data Cable - [ Ссылка ]

🔗 Software Links:
- WLED Firmware - [ Ссылка ]

🔗 Other Tutorials:
- How you can TRANSFORM your GAMING SETUP with RGB Lighting - [ Ссылка ]

Here are some other items you would find helpful for bigger projects, and parts I used to build my floor and desk lamps.

- LED Strip, 3.3ft, 144 pixels (This is what I show you in the video) - [ Ссылка ] (Best)
- LED Strip, 16.4ft, 300 pixels (60Pixels/m) in Black - non eco - [ Ссылка ] (Better)
- 50ft 18AWG Low Voltage LED cable - [ Ссылка ]
- Soldering Iron (super inexpensive but gets the job done)- [ Ссылка ]
- Wago Connectors - [ Ссылка ] (Not used in this project but very handy!)
- No Solder LED Light Strip Joiners, allows you to join multiple strips together - [ Ссылка ]
- 5v Power Supply for larger projects - [ Ссылка ]
- Heat Shrink tubing (helps cover soldered joins and helps prevent shorting - [ Ссылка ]
- 30mm Wide Spotless Aluminum LED Channel System with Milky White Cover Lens Frosted Diffuser (used for my floor and desk lamps) [ Ссылка ]
- 1.25" Square Poplar Dowels (4 Pack) - [ Ссылка ]...
- Prusa Mini + 3D Printer - [ Ссылка ]...
- Filament used for printing the bases of my Floor/Desk Lamps - [ Ссылка ]

...and if you get the munchies while building, grab some meat sticks! [ Ссылка ]

Follow along as I explain each step clearly and provide helpful insights along the way. By the end of this tutorial, you'll have your ESP32 chip running the WLED firmware.

If you find this tutorial helpful, don't forget to like, comment, and subscribe for more DIY electronics and programming tutorials. Have questions or need assistance? Leave a comment, and I'll do my best to help you out.

Thanks for watching, and let's get started with flashing WLED firmware on your ESP32!

If you've made it this far, please stop by my friends channels for some great tech and gaming related content.

Blaze2k - [ Ссылка ]
Kid_Equinox - [ Ссылка ]
Yeltsin666 - [ Ссылка ]
Prime19 - [ Ссылка ]

Also check out www.pixelbuys.com If you like cool stuff, tech, gaming and more you'll just love Pixel Buys.

#ESP32 #ledlights #wled

свернуть