Buy Now!
New Control Arm Bushing Set from 1AAuto.com [ Ссылка ]
This video shows you how to install new front lower control arm bushings from TRQ on your 1992-1996 Toyota Camry.
Estimated installation time for a professional technician is approximately: 3 hours 48 minutes
This repair was done on a 1995 Toyota Camry LE 2.2L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
1992 Toyota Camry
1993 Toyota Camry
1994 Toyota Camry
1995 Toyota Camry
1996 Toyota Camry
Tools you will need:
• Pry Bar [ Ссылка ]
• 19mm Wrench [ Ссылка ]
• 22mm Wrench
• 12mm Socket [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket
• 21mm Socket
• 22mm Socket [ Ссылка ]
• 30mm Socket
• Press
• Pliers
• Wire Cutters
• Air Chisel
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Cloth Rags [ Ссылка ]
• Cotter Pin
• Gloves [ Ссылка ]
• Marker / Writing Utensil
• Rust Penetrant
• Safety Glasses
• Sandpaper
• Silicone Brake Parts Lubricant
• Silicone Paste
• Chisel [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Razor Blade / Gasket Scraper
• Rubber Mallet
• Vise
• Wheel Chocks
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
