Buy Now!
New Wheel Bearing from 1AAuto.com [ Ссылка ]
This video shows you how to install a wheel bearing on your 2001-2005 Honda Civic. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2001 Honda Civic
2002 Honda Civic
2003 Honda Civic
2004 Honda Civic
2005 Honda Civic
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Phillips Head Screwdriver [ Ссылка ]
• Pocket Screwdriver
• Pry Bar [ Ссылка ]
• 19mm Wrench [ Ссылка ]
• 1/2 Inch Impact Socket Set [ Ссылка ]
• 1/2 Inch Impact Socket Set [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 32mm Socket [ Ссылка ]
• Bearing Puller
• Dead Blow Hammer [ Ссылка ]
• Hub Puller
• Press
• Pliers
• Snap Ring Pliers
• 1/2 Inch Air Impact Gun [ Ссылка ]
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Bearing Grease
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
• Sandpaper
• Chisel [ Ссылка ]
• Hammer [ Ссылка ]
• Rubber Mallet [ Ссылка ]
• Small Hook
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Ещё видео!