We have covered this before, and I got a lot of requests for this type of thing, so I am covering it again, but this time we are trying my new support method of using tons of light supports to lessen the damage done to the model, let's see how it turns out!
Sculpts: Crippled God Foundry
Support them: [ Ссылка ]
Myminifactory: [ Ссылка ]
Patreon: [ Ссылка ]
Check out our 3D Printing info:
Angle guide:
Angle Equation:
0.50 represents the layer height you are printing.
0.35 represents the printer's max resolution, in this case 35 microns.
Put this into Google:
arctan (0.50 / 0.35) in degrees
You get this 55.0079798 degrees or 55, so when doing the angle for bases, and flat objects remember the angle degree and use that to angle the objects.
Here it is with the numbers zeroed for you, just add the resolution of your printer and the layer height you are printing at.
arctan (0.00 / 0.00) in degrees
Check us out on Instagram too:
[ Ссылка ]
Just give us a follow on instagram, and be sure to share this with your friends!
My Lychee Slicer support settings for minis.
Super Light and Light supports
1.15 - 1.22 bar diameter
0.22 - 0.15 tip diameter
3.10 - 3.57 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .29, raft is .50
Mediums
1.33 - 1.44 bar diameter
0.33 - 0.44 tip diameter
3.00 - 3.57 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .50
I rarely use heavy supports, but these are my settings for HEAVY
Heavy
1.55 - 1.75 bar diameter
0.55 - 0.75 tip diameter
4.00 - 5.35 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .50
Happy printing!
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
Ещё видео!