How to solve the Antminer T17+ heat sinks fall off problem? Install the refit hashboard heatsink on the antminer 17 series
This Antminer T17+ upgrade heat sink is used to repair and replace the Antminer T17+ hash board with a large number of heatsinks dropped.
To properly conduct heat from the chip, modifying and upgrading the heat sink is more conducive to increasing mining revenue and reducing losses. Using the Antminer T17+ to upgrade the heat sink can help the miner run more stable.
Antminer T17+ upgrade heat sink installation steps
Sop (Standard Operating Procedure)
1. Remove the heat sink
2. Remove the tin from the chip
3. Clean the dust
4. Cleaning pads
5. Fasten the tin-plated nut (hole facing down) on the pad
6. Fasten the heatsink on the board (thermal paste / pad - on board - set washer - screw)
The tools used in the video are here:
Antminer T17+ upgrade heat sink: [ Ссылка ]
Antminer T17+ Refit Heat Sink Tool Kit: [ Ссылка ]
ANLIXIN-862D desoldering station: [ Ссылка ]
Tin scraper: [ Ссылка ]
circuit board cleaning solution: [ Ссылка ]
Anti-static brush kit for hashboard repair: [ Ссылка ]
Hash board thermal grease: [ Ссылка ]
📖 Like us on Facebook - [ Ссылка ]
🐦Follow us on Twitter -[ Ссылка ]
👪Join our Community -[ Ссылка ]
📱 Follow us on VK - [ Ссылка ]
#antminer #hashboard #bitmain #crypto #cryptomining #bitcoinmining #btcmining #asicminer #miner #zeusmining #bitcoinminer
Ещё видео!