Get yours here: [ Ссылка ]
STEP 1: Remove the rear vent cover by first popping the top tabs. Follow by reaching underneath the side panels to push the bottom tabs of the vent cover.
STEP 2: Before pulling the rear vent cover away, unplug the connectors for both vent illumination and the rear 12V port.
STEP 3: Use a flathead screwdriver to carefully press up on the center bar between the two springs. This will release the tension on the armrest spring mechanism.
STEP 4: Use a flathead screwdriver or pin tool and rubber mallet to tap the armrest retainer pin loose. It may help to use pliers or a small vice grip against the plastic trim to allow the pin to move freely outwards. Remove pin and repeat this process on the other side.
STEP 5: Depress the armrest button, lift it upwards and out from the vehicle. Follow by removing the small rubber tray on the right side of the armrest cavity.
STEP 6: Install the RKP GTS Armrest by pushing it straight down into the armrest cavity.
STEP 7: With the new armrest in place, reconnect the vent illumination and 12V port on the vent cover. Reinstall it by applying uniform pressure to the face of the cover and pressing forward until it clicks in place.
![](https://s2.save4k.ru/pic/ndUU0rHXkik/maxresdefault.jpg)