This is a compact machine for filling soda/soft drinks in PET bottles. It can fill four bottles at once. It is pneumatically operated and easy to use. Its hexagonal soda tank is made out of thick SS 304 sheet to withstand pressure. It has a pressure relief valve, pressurge gage and an automatic air release valve to improve soda quality.

Four bottles are kept on the neck holding plates. The first pneumatic hand lever is pressed – the bottles go up and are locked on the filling valves. When the second pneumatic hand lever is pressed, the filling valves open. After counter pressure, the
soda starts filling. Once the soda is filled in the bottles to the required level, the filling valve is closed. The snifting knob in the front of the tank is pressed. Once snifting is over, the bottles can be brought down and taken off for capping. PET Bottle capping machines are also available with us.

Any PET bottle of size from 200 ml to 2000 ml can be filled. The machine can fill about 8 bottles per minute of 300 ml size. For larger bottles, production will be less. But production also depends on the dexterity and speed of the operator.

The machine has very low maintenance and requires a few washer changes from time to time depending on its usage. It is user serviceable and does not require special expertise for this. It is available with one & two filling heads and PLC controlled also.

свернуть