Hello folks! Today I want to show you my new antique restoration! I found this piece of an old shashka sword at a flea market. This item was used as a cleaver or a regular knife, but I will fix it! Well, let's start the restoration!
0:00 Review
0:28 Handle dismantling
1:52 Rust remover
3:13 Metalworking
4:22 Sanding
4:30 Bip-bip
4:54 Etching
5:54 Handle part 1
8:28 Handle part 2
10:30 Handle gluing
11:39 Final processing
12:08 Wood scabbard
15:31 Leatherworking
16:26 Making scabbard fittings
18:43 Leather suspension for scabbard
19:31 Finishing touches
20:59 Final review
21:37 Test
I decided to make a cossack knife out of this piece of shashka.
First, I removed the old handle. And put a piece of a checker in a rust remover. As usual, after I washed, dried and oiled. I decided to shape the knife by cutting off a small piece of steel from the blade. Next, I processed the blade on a sanding machine. Also, I corrected the cutting edge, the shape and made new bevels. With the help of an iron wire brush, I cleaned the metal surface. Next, sanding of the cutting edge and etching of the blade in iron chloride.
The next item is the handle. I chose beech wood. Initially, I glued two parts together, and then cut out the shape of the handle. After the final processing, I moved on to creating the scabbard.
The sheath for the knife was made of wood, pasted with genuine leather and additionally made of brass fittings.
I made a leather suspension so that I could wear a knife on my belt. And as usual, a delicious and interesting knife test is waiting for you! I hope, you will enjoy this antique restoration video. Thank you for attention!
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: [ Ссылка ]
Paypal: paypal.me/screwsandtools
Facebook: [ Ссылка ]
Instagram: [ Ссылка ]
#screwsandtools #knife #restoration
