Die vertikale Alternative: Schleppschuhgestänge mit vertikaler Klappung liegen im Trend bei der Nachrüstung an kleineren Fässern. Wir haben das 10,50 m breite Vogelsang Unispread in der Praxis getestet.
Aus profi 09/2022: [ Ссылка ]
Wie eine Nachrüstung abläuft, haben wir in profi 6/2022 am Beispiel eines 10 m³ großen Pumpfasses von BSA beschrieben:
[ Ссылка ]
[ Ссылка ]
Allgemeines zur Technik:
Das Gestänge klappt vertikal und braucht nicht seitlich ans Fass klappen. Daher ist es interessant für die Nachrüstung und mit dieser Doppelkappung kommen wir auch diese Arbeitsbreite von 10,50 m.
Wir haben ihre Schleppschuhe im Abstand von 25 cm und das Gestänge hat damit einen Durchgang von etwa 70 cm.
Wir haben hier einen Fassinhalt von zehn Kubikmetern. Das Fass ist verhältnismäßig lang und ist per se für eine seitliche klappe schon vorgesehen, das heißt hier können Gestänge bis 15 m seitlich geklappt werden, ohne dass sie vorher überstehen.
Das Fass wird unten angehangen in der K80 Kugel, kann bis zu 2 t Stützlast übertragen und per Gelenkwelle wird direkt die Schneckenverdrängerpumpe - auch von BSA – angetrieben. Das heißt wir haben hier einen Pump-Fass mit einer Pumpleistung von vier Kubikmetern pro Minute.
Hydraulisch wird angetrieben über ein Loadsensingsystem oder ein Druckumlaufsystem dass ein und ausklappen des Gestänges, das Hoch- und Runterfahren am vor Gelände sowie der hydraulisch angetriebene Schneidverteiler ECQ.
Der ECQ-Verteiler bietet sich insofern für dieses Gestänge an, weil es per se nur eine Lauf/Liter-Leistung nötig hat von etwa 35 l pro Minute um ausreichend Verteilgenauigkeit zu gewährleisten und zu schneiden. Das Fass selbst sieht man hier hat ein gutes Schauglas, hat zusätzlich noch eine Schwimmeranzeiger und voll oder leer
Über die Schwimmer anzeige wird die ALB der Druckluftbremse gesteuert, das heißt damit hat man als Fahrer nichts zu tun.
Das geht hier gerade so auf, was das Gestänge genau wiegt - Vogelsang gibt 900 kg an
Dreiwegehahn:
Am Vorgewende kann der Dreiwegehahn geschlossen werden die Zapfwelle könnte weiter drehen da wird die Gülle in den Kreis gepumpt
Setzt man wieder bei der nächsten Bahn ein wir der Dreiwegehahn geöffnet und die Gülle wird in den Schlauch geleitet. Je nach gewünschter ausbringen Menge kann man die Öffnungsweite beziehungsweise den -Winkel des Dreiwegehahn über einen einfachen Steckbolzen einstellen, so dass man nicht zu schnell fahren muss bzw. zu langsam.
Das heißt, wir haben bei voller Öffnung zweite und etwa acht bis zehn km/h bei 400 Zapfwellen-Touren bringen wir schon 25 Kubikmeter pro Hektar aus.
Achse:
Das Achs-Aggregat von dem BSA was hier stammt von ADR.
Wir haben ein Blattfederpaket letztendlich angebracht als Tandem-Achse und die zweite Achse ist bei dieser Bereifung nachlaufgelenkt, die dann hydraulisch der rückwärtsfahrt gesperrt werden kann.
Bedienbox:
Die Symbolik ist eindeutig. Das heißt wir haben das einen Ein- und Ausklappen des Gestänges, das auch gleichzeitig die Straßensicherung öffnet wenn man kurz Zeit auf das einklappen Symbol geht und dann gleichzeitig ausklappt.
Dann haben wir das Anheben und Senken der Schleppschuhe. Wir haben die Schwimmstellung für das Schleppschuh-Gestänge. Das heißt, dann passt es sich permanent den Boden an auch bei Kuppen - das ist die Empfehlung auch von Vogelsang.
Wir haben die Schieberöffnung und das Schieber schließen des Dreiwegehahn, was im System bei Vogelsang im Werk mit eingebunden wurde. Und wir haben den Links- und Rechtslauf des hydraulischen Schneidverteilers ECQ. Was wir uns wünschen würden, wäre neben der Folgeschaltung auch eine kleine LED für den Schneidverteiler bzw. eine Druckuhr vorne am Fass, dass man erkennen kann wann der Verteiler blockiert.
Credits:
Redaktion Tobias Bensing
Kamera: Michel Velderman
Schnitt: Maja Knutzen (LV MediaPro)
Musik: Neda by Tom Murill
Ещё видео!