For the Ford Mondeo MK3, year 2000, 2001, 2002, 2003, 2004, 2005, 2006 and 2007. We show how to open your headlight and mount (custom) a D2S bi-xenon projector.

𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
[ Ссылка ]

𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀:
0:00 Put the headlight in the carton box for about 15 minutes and put the heat gun in the first stand. Try to separate the glass from the housing with a flat screw driver
0:36 Unscrew the inlay and pull it out
0:44 Don't forget the screw behind the white plastic cap (on left for your position bulbs)
1:16 Undo the igniter of the bulb and get out the whole holder
1:28 Unscrew the screws of the projector and take it out even as the shroud what's clicked by two lips
1:47 Of course we've draw the line on the wall before we remove this original projector. For now, make the backside flat
2:33 Align the new D2S 3.0 projector to the original line (and the high beam) and mark the mounting points
2:49 Pre drill the holes and mount the projector in there. We used a 2 components glue and metal to fix it.
(Also the mounting screws can be fixed some extra with this glue and metal)
3:48 Drill in the center of the original shroud a bigger hole for the bigger lens
4:10 Place the holder back in the housing and clean it all
4:37 Also the inlay need now back in the housing (we've paint it black matte)
4:56 Press the glass back on there, and put it in the carton box again for about 15 minutes
5:26 It could be you'll need D2S to AMP adapters and the AMP to D2S adapters, because the red block is to big

𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look

𝗧𝗵𝗶𝘀 𝗸𝗶𝘁 𝘄𝗶𝗹𝗹 𝗳𝗶𝘁 𝗼𝗻:
• Ford Mondeo MK3 (2000 - 2007)

𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
[ Ссылка ]

𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: [ Ссылка ]
Messenger: [ Ссылка ]
Instagram: [ Ссылка ]
Our website: [ Ссылка ]

𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.

A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!

The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.

Do you have any questions? Do not hesitate to contact us, we are happy to help you out!

Good luck with your retrofit!

These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.

#Ford #Modeo-MKIII #Ford-Mondeo-MKIII #Aharon #Retrofit #DIY #Upgrade #Headlight #lighting #HID
#Retrofit #LED #custom #improvement

свернуть