In this video, Mike demonstrates his process of using epoxy colored fill in one of his projects.

For more information check us out at:
www.northernridgedesigns.com
Instagram: [ Ссылка ]
Facebook: www.facebook.com/NorthernRidgeDesigns

This description contains affiliate links. An affiliate link means I may earn commissions for items you purchase through links in this post (at no additional cost to you). As an Amazon Associate I earn from qualifying purchases.

Stone Coat Countertop Epoxy
This is the epoxy used to do seal coats and the final flood coat. It is very durable, as well as heat and yellowing resistant. [ Ссылка ]

Color Powder Additive
Metallic powder additive used with the super cast epoxy. [ Ссылка ]

Mixing Cups
When using a specific ratio epoxy, measuring your amounts is extremely important. Here is the brand of mixing cup I trust and has never let me down [ Ссылка ]

Diablo Sanding Discs
I use Diablo 5" random orbital sanding discs (I use different grits, working my way up to 220 - there is no need to go beyond 220 grit when using epoxy) [ Ссылка ]

Dewalt Orbital Sander
With the exception of a little hand sanding, I use this Dewalt Random Orbital Sander [ Ссылка ]

Metal Sanding Discs
These are the metal sanding disks I use on my 4 1/2 grinder with the grinder conversion attachment. I use 50 grit. [ Ссылка ]

Angle Grinder Sanding Disc Attachment
To remove router lines, excess epoxy, and/or hardened epoxy drips, I use this conversion grinder attachment on my 4 1/2 grinder and attach low grit metal sanding disks. [ Ссылка ]

Self-Igniting Torch ***
This is the self-igniting propane torch I prefer to pop air bubbles. [ Ссылка ]

Chop Brush
Quality brush used to chop out the epoxy flood coat [ Ссылка ] or if you are planning on doing a couple epoxy projects or working with bark on, I suggest this bulk pack of 12. [ Ссылка ]

Burn in Wax Stick
Burn in wax sticks used to fill stubborn pinholes between seal coats of epoxy [ Ссылка ] and [ Ссылка ]

1/8 Inch Square Notch Trowel
You can keep reusing your trowel by simply letting the epoxy drain off the square notches. This 1/8 x 1/8 x 1/8 square notch trowel is the size you need for the flood coat [ Ссылка ]

свернуть