Let's build a robot car that uses those slotted "optical speed sensors"! We'll also learn about Arduino Interrupts.

Get full instructions and Arduino sketches at [ Ссылка ]
More articles and tutorials: [ Ссылка ]
Join the conversation on the forum: [ Ссылка ]
Subscribe to the newsletter and stay in touch:[ Ссылка ]

In this video, I will show you how to assemble a very popular 2WD robot car chassis kit and how to use the speed sensor disks or “encoder wheels” that are included with the kit. You’ll learn how to couple the encoder wheels with a couple of inexpensive optical sensors that are based upon an optocoupler and an LM393 dual comparator chip, allowing you to measure speed and distance traveled.

These inexpensive kits can form the basis of a simple or sophisticated robot, you are only limited by your imagination (and budget and technical abilities LOL). I’ll show you an example of a robot I’m constructing that illustrates just how much you can expand upon the basic robot car chassis, and I’ll offer some suggestions for planning out your own unique robotic creation.

There are a couple of different styles of these kits, I will show you two of them. The main difference between them is in how the motors are mounted to the chassis - one uses an acrylic mount while the other uses a mount made of aluminum. Either type is perfectly fine to use for these experiments.

In addition to the robot car chassis kit and a pair of LM393-based optical sensors, you’ll need an Arduino Uno and an L298N H-Bridge motor driver, as well as a few batteries to power everything up. I’ll show you how to hook it all up and how to determine the optimum placement for these components on your robot car chassis.

I’ll then explain how the optical sensor works and how you can use its readings to determine not only speed but distance as well.

Then comes the code! If you are relatively new to Arduino programming then you might not have used “interrupts” before, so it’s time to learn something new. The Arduino Uno allows for two hardware interrupts and both will be used in this design.

Here is an outline of what’s covered in the video:

00:00 - Introduction
02:20 - Extra parts you’ll need
03:00 - Parts included with Robot Car Kit
04:54 - Planning your Robot Car design
08:24 - Building the Robot Car
10:13 - Speed Encoder & Opto Interrupter operation
11:18 - Speed Encoder & Opto Interrupter demonstration
12:46 - LM393-based Speed Sensor
13:21 - How a Comparator works
14:18 - Explaining Arduino Interrupts
18:04 - Arduino Speed Sensor demo setup
19:14 - Arduino Speed Sensor demo sketch
26:19 - Arduino Speed Sensor in action
27:27 - Calculating Speed and Distance
28:57 - Robot Car wiring layout
32:32 - Robot Car Schematic
34:35 - Arduino Sketch for Robot Car
45:35 - Robot Car in Action!
46:52 - Conclusion

There is a lot covered in this video but it actually just scratches the surface of the potential our little Robot Car has. I’m going to keep this car and add to it in future videos so if you want to know when there are updates (such as the much-requested remote control feature) please subscribe to the channel!

Again all of the code is available on the DroneBot Workshop website .

Hope you enjoy the video!

свернуть