Check out all the Fork and Clamp meters from IDEAL.
[ Ссылка ]
The IDEAL 61-405 is an auto ranging true RMS digital fork meter that measures current up to 200 Amps AC between the fork tines.
It is UL certified and is CAT III 600 volt safety rated.Have you ever had to measure a circuits current draw in a confined, dimly lit and hard to reach location where squeezing open the jaws of a standard clamp meter is a hassle? The IDEAL Fork Meter allows the user to safely slide the forks around a conductor up to 4 aught in size. It lets you easily take readings and eliminates the need to bend or twist conductors or place your head near or in the panel. Also, the width of each of the tines of the fork are 18 mm which allows them to fit between conductors on a three phase circuit breaker.
The display is a large 6000 count display that can be backlit, and the built-in flashlight can be used to illuminate a work area when working in poor or low lighting conditions.
It measures up to 600 volts AC or DC and using the select button can toggle between testing continuity, resistance, capacitance, and diodes via the test-leads.
It detects the presence of voltage between 40 to 600 volts AC via a non-contact sensor built into the tip of the right fork. Simply rotate the dial to NCV and the letters EF will show in the display. Then hold the tester near a hot conductor like this receptacle to indicate if voltage is present the red LED will illuminate, and the beeper will sound.
The unit uses an illuminated red LED in the center of the meter and emits a momentary audible tones to notify when the voltage being measured is above 30 volts, and a lightning bolt in the left of the display indicates the potential requirement that personal protective equipment should be used when making measurements in certain applications.
This meter features HOLD, MIN/MAX, Relative, Range, and selectable Auto Power Off functions. It comes with three 1.5V AAA Batteries and an easy open, fully accessible storage pouch with a belt loop that allows for storage.
The back of the meter has a built-in two position dual probe holder; the lower position allows for probe storage, the higher position allows for testing holding the meter and secured probe in one hand and the second probe in the other hand, or for both probes to be secured in the higher position while conducting measurements.
Note that the CAT III safety rating of the tester is lowered to a CAT II rating when the protective caps are removed. Always replace them after testing a standard outlet to reduce the chances of inadvertently shorting two conductors with exposed metal tips.
The meter has a hanging strap mount that allows for a hanging strap which is sold separately to be attached to the meter so it can be hung from a nail, screw, or magnetic surface.
The 61-405 Fork Meter is a rugged tester for everyday use that can be used in residential, commercial, or industrial electrical applications.
Thanks for watching folks please read and fully understand the instruction manual before using this tester I’m Ron with IDEAL I’ll see you on the next one.
#IDEALINDUSTRIES #RonKipperFromIDEAL #61-405FORKMETER
Ещё видео!