Buy Now!
New Exhaust Manifold Catalytic Converter Assembly from 1AAuto.com [ Ссылка ]

This video shows you how to install a new TRQ direct-fit bolt up catalytic converter assembly on your 2012-2020 Chevrolet Sonic 1.8L L4. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.

Estimated installation time for a professional technician is approximately: 1 hour 18 minutes

This repair was done on a 2013 Chevrolet Sonic LT 1.8L Hatchback 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Chevrolet Sonic
2013 Chevrolet Sonic
2014 Chevrolet Sonic
2015 Chevrolet Sonic
2016 Chevrolet Sonic
2017 Chevrolet Sonic
2018 Chevrolet Sonic
2019 Chevrolet Sonic
2020 Chevrolet Sonic

Tools you will need:
• 10mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 22mm Socket [ Ссылка ]
• O2 Sensor Socket
• E12 Inverted Torx Socket
• E7 Inverted Torx Socket
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Cloth Rags [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Drain Pan
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Razor Blade / Gasket Scraper
• Wheel Chocks

Subscribe: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть