This old hand cutter from Gesetzlich-Gesmutzt
I got to renovate from a friend of mine who built a museum.
He wanted the cutter to its original gray color with gold trim.
Those cutters were made around 1800.

If you have some information about copper cleaning, you can share it with others on my Facebook page:

[ Ссылка ]

If you have any questions about the process, use machines or other things, ask me in the comments. I try to answer everyone and as soon as possible.

I'm sorry for my bad English, it's not my language.

I'm uploading videos about recovering mechanical things. I'm uploading videos about restoring old wooden things.

Share and send if you like this recovery :)

Thanks for your advice on how to improve this channel!

youtube channel [ Ссылка ]


action index:


0:06 demonstration
0:47 disassembly
3:55 soak in sodium hydroxide dissolved in boiling water.
ATTENTION! Sodium hydroxide is corrosive! Wear protective equipment!
4:13 After 24 hours remove the solution and clean with a brush under running water.
4:42 Sodium hydroxide cleaned parts are easier to clean with a wire disc
4:58 Coat the cleaned rust parts with a rust remover.
5:28 After drying, clean with a metal wool or a wire brush
5:55 paste the areas that we will not spray with paper tape
6:28 all parts are primed and after drying the upper color (I used a synthetic color)
6:41 After thorough drying of the top paint, we will gild. I used a gold alcohol marker.
7:23 Our dog Mona is tired too :)
7:35 While the dog rested, we're done! :)
 7:53 Wooden parts still to be finished.
8:08 Glue the cleaned wood with paper tape so that it does not get dirty when polishing the brass comb.
8:25 Polish the brass ridge with a rag wheel and abrasive paste.
8:33 Remove the remainder of the paste with technical petrol
8:55 It is still necessary to sand the top plate with P180 sanding paper and P 220 sanding sponge
9:08 Oil has been used to impregnate the wood, which can come into contact with food. After the mallow clean everything thoroughly with a cloth.
9:28 Remove the adhesive tape from the sprayed parts and wipe the spots where the paint leaks.
9:45 And the compilation begins. First screw the knives. The handle is followed by the body assembly itself. Each thread should be greased with grease.
11:30 The body of the cutter has been folded and the top plate and the wooden cylinder with rages and a toothed comb used to feed the cut tobacco remain.
12:40 Demonstration of functionality. Since tobacco does not grow in our country, we used Levisticum officinale.

свернуть