Buy Now!
New Ball Joint from 1AAuto.com [ Ссылка ]
Modern suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new, quality TRQ ball joints on your 2008-16 Chrysler Town & Country.
• Check here for more videos on the 2008-16 Chrysler Town & Country [ Ссылка ]
This process should be similar on the following vehicles:
2008 Chrysler Town & Country
2009 Chrysler Town & Country
2010 Chrysler Town & Country
2011 Chrysler Town & Country
2012 Chrysler Town & Country
2013 Chrysler Town & Country
2014 Chrysler Town & Country
2015 Chrysler Town & Country
2016 Chrysler Town & Country
Tools you will need:
• 21mm wrench
• 10mm Socket [ Ссылка ]
• 18mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 21mm Socket [ Ссылка ]
• 32mm Socket [ Ссылка ]
• Ball Joint Press
• Brake Caliper Hanger [ Ссылка ]
• Pickle Fork
• Snap Ring Pliers
• Straight Cutters
• 1/2 Inch Air Impact Gun [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Cotter Pin
• Liquid Thread Locker
• Rust Penetrant
• Safety Glasses [ Ссылка ]
• Center Punch [ Ссылка ]
• Hammer [ Ссылка ]
• Sledge Hammer [ Ссылка ]
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Chrysler Town & Country 2008-16 5th Gen: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
