Use a waterproof pen to write the activation and expected replacement date on the lubricator.
If there are any grease fittings on the bearing, remove them. Replace the fitting with a suitable adapter and use a custom sealant.
Take a grease gun and pre-fill the lubrication point, any grease lines, and all adapters with the same grease that is contained in the lubricator.
Remove the black outlet plug from the lubricator and screw the activated lubrication system into the lubrication point. Place the protection cover on the control unit for extra protection. Our website shows additional installation examples with tubes and mounting brackets.

For further information please visit our website www.perma-tec.com or
contact us by E-Mail on info@perma-tec.com

свернуть