I was trouble shooting my sisters 08 Honda Element and figured I'd share a quick video. I almost took this car to a shop since I could not read it with my generic OBD2 reader.
Glad I found this info, hope this helps someone else.
Found this information at elementownersclub.com and a mixture of youtube videos.
For education purposes only.
Attempt at your own risk.
VERY IMPORTANT THAT YOU START WITH KEY OFF BEFORE JUMPING THE OBD2 CONNECTORS.
MAKE SURE YOU TAKE OFF THE JUMPER WIRE AFTER.
OBD2 pin to jump
Pin 9 and Pin 4
Each long flash of "D" = 10
Each short flash of "D" = 1
Long pause of "D"/ being OFF = its cycling to repeat.
Once you have the code count reference against the code below. In my cause its code 40 (due to 4 long flash and no short flash)
If you find more codes or you find an error please comment below for others to find.
05- transmission range switch
07- shift solenoid valve A
08- shift solenoid valve b
09- output shaft speed sensor
15- input shaft speed sensor
16- clutch pressure solenoid valve A
22- shift solenoid valve c
23- clutch pressure solenoid valve B
25- 2nd clutch fluid pressure switch
26- 3rd clutch fluid pressure switch
27- 4th clutch fluid pressure switch
28- ATF temperature sensor
29- clutch pressure solenoid valve C
40- torque converter clutch circuit
45- shift control system
61- shift solenoid valve E
62- transmission range switch
70- shift solenoid valve A stuck on
72- shift solenoid valve C stuck off
74- shift solenoid valve E stuck off
76- clutch pressure control solenoid valve A
77- clutch pressure solenoid valve B
78- clutch pressure solenoid valve c
🎥 PREVIOUS VIDEO » [ Ссылка ]
Subscribe to my channel to join the Kill Mode Squad & hit the bell 🔔 so you never miss an upload! » [ Ссылка ] for new videos!
for new videos!
Follow me on
INSTAGRAM » [ Ссылка ]
TIKTOK » @marnellbalmeo
TWITTER » [ Ссылка ]
