The excitation force of the vibrating motor of the linear vibrating screen determines the amount of production. Let's test it with a screw cap below.
It can be seen that the screw cap moves slowly on the screen with low frequency vibration and accumulation. It can be seen that the low excitation force cannot perfectly achieve the screening effect when the weight of the material is heavy. Next, adjust the eccentric shaft of the motor. There are two eccentric shafts at the upper and lower ends of the motor. When the eccentric shafts overlap, the excitation force is stronger. The greater the separation angle of the eccentric shaft, the weaker the excitation force of the motor.
Check the effect after adjusting the eccentric shaft.
Compared with the previous screening effect, it can be seen that the screening speed of the material on the screen has been significantly increased.
If you find that the vibrating screen or linear vibrating screen equipment is not strong, you can try to adjust whether the eccentric shaft of the motor has changed.

For more information about linear vibrating screen knowledge, please visit: [ Ссылка ]

свернуть