The Titan pump is unique to Red Paddle Co, designed specifically for the use on inflatable SUP boards.
Compared with standard pumps, it makes it much quicker and easier to pump the board.
Almost all of its 14 component parts are replaceable.
The gaskets sit in the bottom of the piston rings which push through and pull out the other side.
An O-ring fits over the outside of each piston ring before screwing them onto the metal pump shafts (it doesn’t matter which way round the shafts go).
Place the pump shafts into the chambers before fitting the black cap.
Screw in the 4 screws which hold the cap in place.
Screw the pressure gauge into the handle.
Finally, screw the metal shafts into the handle one side at a time taking care not to cross the threads.
It’s as easy as that! The Titan pump assembled in under a minute.
We are dedicated on providing the most efficient pump in the inflatable SUP market.
Follow us online:
Facebook: [ Ссылка ]
Twitter: [ Ссылка ]
Instagram: [ Ссылка ]
Pinterest: [ Ссылка ]
