#PCfrontPanel #pcconnectors #PWRsw

ppl always seem to have trouble with plugging in the front panel cables
f_usb/ pwr led =- /usb_3.0/HD audio/pwr sw/reset sw/hdd led/ led pwr /speaker/

heres a quick video on how you plug route and plug in the front panel cables
now from left to right it usually goes like this from top left to right

pwr led + - /pwr sw/blank pin then theres another 9 pins and speaker is usually the top 4 pins
hdd led +- /reset sw/ single pin

note: its important when u plug in the hd audio and the f_usb, you align the pluf with the pins
theres always a pin missing forboth hd audio and f_usb

if you plug it in the wrong way
1. wont work
2. youll make a hole in the plug cuz the pin will plug a hole due to not being lined up

usb 3.0 has a tab you follow top ensure its plugged in correctly

reset sw and power sw can be plugged in any way, as long as its plugged in , these simply work by touching together wen u press the button and short to each other in order to reset or power on or off

most pcs have 4pins for speaker , but its really the outer 2 pins that matter, it doesnt matter how u plug the speaker in as long as you plug it in with pos and neg in the right spots, you can plug them in reverse and itll still beep

some it mobo only have 2 pin for speaker, in this cxase just unclip the pos or neg and place them next to each other and plug it in

hope this helps

subscribe for moree content

свернуть