operations of your glass door merchandiser is that can be done is to clean the condenser coal for your case this will increase the performance of the unit and also the efficiency.
The front grill is attached by four screws one in each corner. How to take those out with just a regular Phillips head screwdriver?
You've removed the front grill then be exposed power to the case should be off at this point.
once you've cleaned your condenser coal reinstall the front grille and be sure to put the screws back in his way the next thing to check for is the adjustment of your doors to make sure that they self closed properly.
As you can see this door does not self close that can be easily adjusted by the adjustment at the bottom of the door to do this all you need is a Flathead screwdriver and turn the screw counterclockwise until the door closes.
In your case a general cleaning this can be done with just a general purpose glass cleaner for the glass doors as well as the painted panels.
Cleaning should be performed by a service technician for technical assistance there's a 1-800 number listed on the top left of your cabinet also it will tell the model number and the serial number of the case please have these numbers ready once you make the call.
For more information visit us [ Ссылка ]
![](https://s2.save4k.ru/pic/q262fkCtFfQ/mqdefault.jpg)