DP Ceramic Rinseless Wash - A ceramic wash without a lot of water!

DP Ceramic Rinseless Wash is an SiO2 based formula that adds protection and hydrophobicity to your wash. Being able to be diluted into five different products, DP Ceramic Rinseless Wash is a very versatile product that can be used in a variety of ways. DP Ceramic Rinseless Wash is designed to be used with ceramic coated vehicles, to provide a lubricated wash that is gently on the surface, but tough on contaminants. Best of all, you need very little water to use DP Ceramic Rinseless Wash.

We don’t always have access to a hose of running water. A lot of us live in apartments or condos without the capability or sometimes weather is a factor. Not only that, but not all washes are created equal, these days you need a wash that will work with your newly coated ceramic surfaces. To fit both of these instances, you need DP Ceramic Rinseless Wash.

DP Ceramic Rinseless Wash gently and effortless cleans your surface of contaminants. Contaminants including dirt, grime, dust, bug guts and more. Not only does it remove it, but thanks to its highly lubricating formula, you don't have to worry about harming the surface as you clean. Plus, DP Ceramic Rinseless Wash is a rinseless wash, meaning all you need is a two-to-five-gallon bucket of water. So, if you don't have a hose hook up readily accessible or need to wash in the winter or in your garage, you can still wash your car.

Infused with SiO2, DP Ceramic Rinseless Wash uses this unique property to add hydrophobicity and protection. This allows for water beading, causing water and contaminants to bead up and roll away, rather than sit around and cause water spots. Plus, SiO2 helps to boost your already applied ceramic coating.

The detailing doesn’t stop with a washing. Instead, with DP Ceramic Rinseless Wash you can dilute the product to make waterless wash (dilute 1/3 oz. to 16 oz. of water), a clay lubricant (dilute 1 oz. to 128 oz. of water), a detail spray (3 oz. to 128 oz. of water) and a car was additive (1/2 oz. to a bucket of soapy water).

DIRECTIONS:
- Dilute 1 oz. of DP Ceramic Rinseless Wash with 2 gallons of water.
- Make sure you have plenty of microfiber towels on hand!
- Soak your rinseless wash mitt or microfiber towels in the solution prior to use.
- Starting at the top of the vehicle, wash one 3 x 3 sq. ft. area at a time.
- Once a panel has been washed, dry it immediately.
- Continue around vehicle.

OTHER DILUTION RATIOS:
- Waterless Wash: 1/3 oz. to 16 oz. of water
- Clay Lubricant: 1 oz. to 128 oz. of water
- Detail Spray: 3 oz. to 128 oz. of water
- Car Wash Additive: ½ oz. to your bucket of soapy water

Shop now - [ Ссылка ]

свернуть