Buy Now!
New Exhaust Manifold Catalytic Converter Assembly from 1AAuto.com [ Ссылка ]
This video shows you how to install a new exhaust manifold catalytic converter assembly from TRQ on your 2007-2012 Nissan Altima. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.
This process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima
Tools you will need:
• 10mm Wrench [ Ссылка ]
• 12mm Wrench [ Ссылка ]
• 14mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 13mm Socket [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 21mm Socket [ Ссылка ]
• 22mm Socket [ Ссылка ]
• O2 Sensor Socket
• Trim Tool Set [ Ссылка ]
• Vacuum
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Impact Gun
• T55 Torx Socket
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
• 5mm Hex Socket
• 5mm Hex Wrench
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Razor Blade / Gasket Scraper [ Ссылка ]
• Sanding Block
• Wheel Chocks
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Ещё видео!