Old Arcade1up countercade(Gen1) Screen will not work with new model PCB card from PAC-MAN(Gen2)
But DigDug Old model (Gen1) PCB card will work with New screen that come with PAC-MAN 40 anniversary countercade(Gen2).
00:01 Gen1 8" Screen Using Gen2 Pac-Man PCB board
07:23 Gen2 8' Screen using Gen1 DigDug PCB board.
10:16 Gen2 8" Screen demo Raspberry Pi 3B Plus
After burning the image to 128GB MicroSD card edit SDcard file call config.txt
on your config.txt file add:
#Virtical Screen Setup.
#1 is 90 degrees* display_rotate=1
#2 is 180 degrees * display_rotate=2 (for attackmode)
#3 is 270 degrees * display_rotate=3 (for Emulation)
display_rotate=2
The Ultimate Vertical Raspberry Pi 3b+ Retropie Image – 128gb Ultimate from 2EC
[ Ссылка ]
Mod Gen2 countercade Arcade1up for Raspberry Pi 3B Plus using the Gen2 Screen you need:
1)Arcade1Up 8" LCD Video Driver Converter Board, add HDMI VGA, Countercade Counter
[ Ссылка ]
2) Also need PCB from Gen1 for this adaptor to work. Without it will not work
YD-PCONVERT-V11-V2 20190508 (XZG 1925) can't find this card from ebay.com or amazon.com
Ещё видео!