Tesla will void your warranty if you incorrectly tap power from the wrong source. Hardwire your accessories the right way, carefully, and successfully.
Go to VCRight to find your 12v switched power to tap your accessories. Hardwire your radar detector with the correct accessory power.
You want the accessory to power down when you leave the car, even when Sentri is on. If you stick it in your cigarette plug, it may stay on for hours when Sentri is on. This is a better way, and you won't get any battery drain error messages from Tesla.
Also, put a fuse on the tapped wire, for protection. Depending on the application, I use a 10amp mini fuse (red).
Uniden R7 - [ Ссылка ]
Direct hard wire cord for Uniden radar detectors - [ Ссылка ]
Tools:
Clamp Ammeter - [ Ссылка ]
Multimeter - [ Ссылка ]
Sander attachment - [ Ссылка ]
Here's a good trim tool set - [ Ссылка ]
drill bit set - [ Ссылка ]
Should be in everyone's toolbox:
I use Posi Taps on all my cars - [ Ссылка ]
because it fits into tight spaces, is the most secure and won't come loose.
mini-fuse holder - [ Ссылка ]
spade connectors - [ Ссылка ]
Wire stripper - [ Ссылка ]
silicone wires 20AWG - [ Ссылка ]
silicone wires set - [ Ссылка ]
=====================================================
🡇 CHECK OUT OUR OTHER VIDEOS:
➤ [ Ссылка ]
➤ [ Ссылка ]
➤ [ Ссылка ]
=====================================================
IF YOU LIKE THIS VIDEO, PLEASE HIT THE 👍THUMBS UP THE BUTTON, SHARE AND WE WILL BE WONDERING IF YOU DECIDE TO 🙌SUBSCRIBE 🙌 TO OUR CHANNEL:
🙌SUBSCRIBE HERE 🡇
➤ [ Ссылка ]
🔊Disclaimer: This video/content and the resources on the YouTube Channel is only for our audience's entertainment and or educational and informational purpose only.
#teslamodely #voidwarranty #accessorypower
