TP4056 HW 357 J5019 AC01
DIY Board for step-up voltage, from 5V or range 4,5 to 8V DC
Output from 4,3V to 27V DC.
Good for DIY step-up power voltage
Minimum Discharge internal circiut between 6mAh (real test).
Specification
Input voltage: DC4.5-8V
Output voltage: DC4.3V-27V
Output current: 2A MAX
Charging voltage 4.2V, charging current 1A
Before use and before debugging, the default output is about 9V
Calculating Discharge Current 2A Output Current
Output reference maximum current 5V 1.4A, 9V 0.8A, 12V 0.6A
The static current is about 0.5 mA
TP4056 HW 357 J5019 AC01 may different specification, but the same function for step up or increase voltage power
00:00 Varian board HW-357, AC01, J4019 and diagram connect board
00:37 Test output voltage HW-357, AC01, J4019
01:32 Test power output HW-357 output 5V - 9V
02:51 Charging lithium battery
03:00 Test output 12V low current load for fan
03:35 Test power 5V to 12V, without battery
05:51 Drain internal circuit HW-357, AC01, J4019
06:00 Charger baterai 500mAh
06:10 Sample diagram circuit with HW-357, AC01, J4019 DIY board
06:19 Application step-up battery to 6V DC for Blood pressure check.
LED Indicator
Charge Red, Stand-by Green
Example
Step up battery power 4V to 9V for Multimeter
Step up battery power 4V or 5V USB power to power 6V DC blood pressure unit
Operation:
Before use and before debugging, the default output is about 9V.
Input voltage: 4.5-8V
Output voltage can be continuously adjusted 4.3-27V
(Over 4.3V, below 27V, can output any voltage, reversible clockwise adjustable voltage)
Charging voltage: 4.2V, charging current 1A. Test only 250mAh
Calculating Discharge Current 2A Output Current, test only 1A or lower
Output reference maximum current 5V 1.4A, 9V 0.8A, 12V 0.6A
The static current is about 0.5 mA, test 0,6mA.
There is no overdischarge protection for overcharge protection (2V cut-off boost is possible, but 2V output is still not blocked)
Cut-off boost 2V, depending on the situation, whether to add protective plate
For example, VIN + BAT + terminal of 5V solar panel can output 4.2V to 3.7V 18650 battery charging OUT + terminal output adjustable voltage need to be adjusted.
It can be used for multimeter and recharging lithium battery
Ещё видео!