Seems everyone I know has a KTM 950 or 990, so a brief overview of the big pumpkins made sense... I prefer smaller bikes but this would be my choice if I needed 1000cc to compensate for my extremely small genitalia (instead I compensate by over eating and crying myself to sleep each night). That was just a teaser, though - as was the second time around in 1996, when it was revealed that the Stuttgart-based design office Kraft Technik, had been commissioned by KTM to produce a design for a V-twin Hard Enduro, possibly using the 60-degree V-twin RSV900 Rotax engine at that time developing for Aprilia. The Italian company however refused to share it with their Austrian neighbours. Another alternative for KTM was the Swedish Folan 60-degree V-twin motor which already existed, however it was also aborted once KTM had been successfully floated on the stock market. The story of KTM 950 Adventure started in 1992. That year, a one-off special called the Bepono, built for the German BoTT series by two engineering students by combining a pair of cylinders from a KTM LC4 single on a special crankcase, was displayed on the KTM stand at the IFMA Show in Cologne. KTM LC8 Engine: By August 1998 the decision was made to go with a 75-degree V-twin design, but with special emphasis on light weight and, especially, compact build. To do so, KTM decided to assume the entire R&D process themselves in-house, and hired Claus Holweg as Project Manager from their Austrian rivals, Rotax. In early 1998, as the company grew in strength and the need to expand its single-cylinder range with a twin-cylinder product line, new V-twin became a priority. Chief engineer Wolfgang Felber made preliminary studies of twin-cylinder engine formats and vehicle concepts. Development and management departments of KTM put designers and model makers together to set a concept. The final prototype's design was completed by Kiska, the design partner of KTM, and presented at Munich Motorcycle show in 2000. Later that year Fabrizio Meoni wins Rallye des Pharaons 2001 following superior victory on the Dakar in 2002, confirming that 950 Adventure is ready. The new engine called LC8 was complete and had its first dyno run on August 11, 1999 in exactly 12 months from the start. After the successful engine development the time came to design the body of 950 Adventure. KTM Adventure prototype? The nearly final form of the 950 Adventure was formally presented in at the 2003 Intermot Motorcycle show. Mass production of the LC8 begins in February 2003. In 2006 KTM stopped producing 950 Adventure. The successor was KTM 990 Adventure which had slightly more engine displacement and fuel injectors instead of carburetors. After the critical votes, KTM CEO Stefan Pierer decided to reject the first draft of the Adventure except few small details, chassis and engine. KTM's designers were innovative in defining a never seen design, strained and broken lines with a very angular fairing. In order to help, engineers asked rally pilot Fabrizio Meoni to assist. In early 2001, engineers quickly built a frame house with ratings defined by Meoni and soon in February 2001, he begins Adventure testing under the real conditions in Tunisia.
Let us know if we used your music in other vids but forgot to credit you. Many thanks to the following artists for their copyright free music in various vids:
Music: [ Ссылка ]
Music: [ Ссылка ]
Music by Tobu: [ Ссылка ]
Music: [ Ссылка ]
Music: [ Ссылка ]
