Buy Now!
New Steering Rack & Pinion Bellow from 1AAuto.com [ Ссылка ]

This video shows you how to install a new steering rack bellows boot on your 2004-2008 Acura TL.

The steering rack bellow is a plastic or rubber cover used to protect the joint between the steering rack and the tie rods from dirt, debris, water, and other contaminants that could corrode or damage the tie rod joint.

This process should be similar on the following vehicles:
2004 Acura TL
2005 Acura TL
2006 Acura TL
2007 Acura TL
2008 Acura TL

Tools you will need:
• Pry Bar [ Ссылка ]
• 24mm Wrench
• 19mm Socket [ Ссылка ]
• Pliers
• Side Cutters
• 3/8 Inch Air Impact Gun
• Torque Wrench [ Ссылка ]
• Cotter Pin
• Wire Ties

Subscribe: [ Ссылка ]

Check out our playlist:
Acura TL 2004-2008 3rd Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть