Hello. In this video I'm changing the oil in my Honda GX200 with Castrol 10W-30. First, I placed 2"x4" boards under the metal plate. Using a drain pan underneath to catch the old oil and recycle it is smart. A 10mm wrench will release the bolt. It'll be pretty black as it drains. I took out the dip stick to help it breath. Once it stops dripping, put the plug back in. There are plugs on both sides so that you can put the dip stick on either side. Depending on whichever is easier to service. I use a transmission dip stick to check the oil level. It usually takes about 3/4 of a quart to fill it. Make sure the pressure washer is level to get a good reading. It's important not to fill it too full. Easy to do.
Follow us here!
SCOTTYS MOBILE DETAILING WEBSITE
[ Ссылка ]
Main YouTube Channel
SCOTTYS DETAILING
[ Ссылка ]
2nd Youtube vlog channel
THE SMD STUDIOS
[ Ссылка ]
SCOTTYS @ LINKEDIN
[ Ссылка ]
SCOTTYS @ FACEBOOK
[ Ссылка ]
SCOTTYS @ TWITTER
[ Ссылка ]
SCOTTYS @ PINTEREST
[ Ссылка ]
ERIC THE CAR GUY
[ Ссылка ]
SCANNER DANNER
[ Ссылка ]
MIGHY CAR MODS
[ Ссылка ]
SWRNC HARD WORKER
[ Ссылка ]
![](https://i.ytimg.com/vi/sG2TDtKGLhQ/mqdefault.jpg)