A homeowner’s radiator sprung away from the pipe when he tried to replace the valve, so Ask This Old House plumbing and HVAC expert Richard Trethewey heads to his house to help him reconnect it

SUBSCRIBE to This Old House: [ Ссылка ]

Time: 1-2 hours
Cost: $50
Skill Level: Difficult

Tools List for Reconnecting a Radiator:
Spud wrench [[ Ссылка ]]
Pipe wrenches [[ Ссылка ]]
Ratchet straps [[ Ссылка ]]
Shims [[ Ссылка ]]

Shopping List:
Hose [[ Ссылка ]]
Radiator valve [[ Ссылка ]]
Pipe dope [[ Ссылка ]]
Single strand wicking [[ Ссылка ]]
2x4’s or other scrap wood [[ Ссылка ]]

Steps:
1. Start by shutting off the boiler and the cold water feed to the boiler.
2. Drain the system using a hose and vent each radiator in the house.
3. Remove the temporary caps using the pipe wrenches. When using the wrench, be sure that it touches the pipe in three places so it does not damage the pipe.
4. Disconnect the spud from the radiator valve.
5. Apply the pipe dope to the threads of the spud and seal it with the single strand wicking.
6. Using the spud wrench, carefully tighten the spud in position. Be sure the threads correctly catch to prevent damage to the spud.
7. Apply the pipe dope and wicking to the pipe coming up through the floor.
8. Thread the other half of the radiator valve onto the pipe, again being cautious of cross threading.
9. Tighten the radiator valve using the pipe wrenches. Once the valve is in the direction of the radiator, it can be reconnected.
10. Wrap the ratchet straps around the legs of the radiator and put a 2x4 or another piece of scrap wood into the strap. Using the 2x4 as a lever, carefully pull the radiator into position with the valve. It might help to wedge shims on the other side of the radiator to hold it in place. You can use multiple levers if you need to adjust the height as well.
11. Once the radiator has been moved so it’s perfectly aligned with the valve, connect the valve to the spud using the nut that connects the two.
12. Once the connection has been made, tighten it with a wrench.
13. With all the work done, turn the cold water feed and the boiler back on and vent all the radiators again.

Resources:
All the tools Richard used to reconnect the radiator, including wrenches, pipe dope, wicking, and the radiator valve, can all be found at home centers and plumbing supply houses.

About Ask This Old House TV:
From the makers of This Old House, America’s first and most trusted home improvement show, Ask This Old House answers the steady stream of home improvement questions asked by viewers across the United States. Covering topics from landscaping to electrical to HVAC and plumbing to painting and more. Ask This Old House features the experts from This Old House, including general contractor Tom Silva, plumbing and heating expert Richard Trethewey, landscape contractor Jenn Nawada, master carpenter Norm Abram, and host Kevin O’Connor. Ask This Old House helps you protect and preserve your greatest investment—your home.

Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: [ Ссылка ]

Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: [ Ссылка ]

Follow This Old House and Ask This Old House:
Facebook: [ Ссылка ]
Twitter: [ Ссылка ]
[ Ссылка ]
Pinterest: [ Ссылка ]
Instagram: [ Ссылка ]
[ Ссылка ]

For more on This Old House and Ask This Old House, visit us at: [ Ссылка ]

Watch the full episode:
[ Ссылка ]

How to Reconnect a Radiator
[ Ссылка ]

свернуть