3 years ago, we've posted our first video on removing orange peel without sanding ([ Ссылка ]). However it was just a very rough demonstration video.
This time, we've done a step-by-step video guiding you through how we remove orange peel here in OSREN without sanding.
Here are some of the tips to take note!
Tip 1:
Use masking tape to mask off unpainted plastics, edges, rubber trims, and panels that bulge out (i.e. door handles & skirtings).
Tip 2:
Prime the pads before use. (For new pads only)
Tip 3:
Work small section at a time.
Tip 4:
Use 600rpm to spread the polish and 1400rpm to buff.
Tip 5:
Use reflections or fluorescent tubes as guide.
Tip 6:
Don't apply too much pressure on edges & curves. Apply pressure on flat panels.
Tip 7:
Go for 2nd pass if necessary.
Tip 8:
Lower down the speed for tight areas.
Tip 9:
Finish up with polish and glaze.
Tip 10:
Clean the denim pad with masking tape's core.
Products available at Amazon:
OSREN Denim pads: [ Ссылка ]
OSREN Perfect 50: [ Ссылка ]
For more info:
OSREN Perfect Fifty :
[ Ссылка ]
OSREN Jeans Sponge:
[ Ссылка ]
-------------------------------------------------
Follow us on:
Facebook : [ Ссылка ]
Instagram : Osren Malaysia
Website : [ Ссылка ]
E-store : [ Ссылка ]
![](https://s2.save4k.ru/pic/sefPixAsDw4/maxresdefault.jpg)