I decided to play with the setting And figure out the best settings for the MFD to pick up low conductors in Black Sand On a salt water beach.

To get more depth These settings should be used, My setup was a little off and was still able to penetrait this ground.
1. Shift frequency away from resonance
2. Switch Economy Mode on
3. Set Gain at a level that produces a straight hodo line (GB Mode), do GB, correct in manual mode.
4. Keep RT/ST on high (11-12) and Gain on low setting (almost no falsings)
5. Choose a low frequency coil over a miiddle or high frequency coil
6. Play with GS Filter

Thanks SuchMuch AKA Forum

свернуть