This video is to walkthrough all the steps to set up a FPV drone.
We will cover, how to flash the ELRS firmware, methods of binding ELRS, setup Fly Modes in Betaflight, connect the VTX to goggles and finally test fly the Baby Ape.
Need to flash your Radio ELRS firmware? Check this！
[ Ссылка ]
Just want to setup a bind phrase to your radio? Check this!
[ Ссылка ]
Below are the links of the software required, they are all free to download
ExpressLRS/ELRS configurator
[ Ссылка ]
Wifi password: expresslrs (all lower case)
Betaflight
[ Ссылка ]
Specs for the Baby Ape
Specifications
Receiver Options: PNP, ELRS 2.4GHz, or R81
Motors: 1104 4300KV 2-3S Brushless Motor
Camera: CADDX ANT Camera
Propellers: 3016 3-Blade
FLIGHT CONTROLLER
If you are willing, you can buy me a coffee to support this channel! Thank you in advance!
[ Ссылка ]
Mounting holes distance: 25.5X25.5mm
PPM/DSM/IBUS/UAR share: UART1-RX
Main control chip: STM32F411
Supports Betaflight firmware
IMU: MPU6500 (SPI)
Integrated OSD
ESC
Firmware upgrade: Supports Dshot600/Oneshot125
Main control chip:EFM8BB21
Continuous current: 15A
Pe ak current:17A (10S)
Input voltage: 1-3SLiPo
BEC output: no
MOS: 3*3
VTX
Transmitting power: 0mW/25mW/100mW/200mW switchable
Weight: ≤3.2g (except antenna)
Power dissipation: +12V/600MW
Full video format: NTSC/PAL
Supports TBS SmartAudio
Input voltage: 7V~24V
Size: 25×20×6mm
Channel: 40CH
0:00 Intro
0:24 Flash ELRS firmware
5:07 Bind with radio
6:44 Set up modes in BF
9:56 Connect to the VTX
11:42 Flying footage
