First attempt at fixing a cracked dash: [ Ссылка ]
Second and successful dash repair: [ Ссылка ]
Comparison of the two, after testing: [ Ссылка ]
How to Remove 1980's Toyota Pickup/4Runner Dash Pad Cover: [ Ссылка ]
This is my second attempt on restoring an old cracked dash from a 1987 Toyota Pickup
This time I'm using spray foam, 4-way stretch vinyl, brush-on contact cement, and vinyl paint in the following order:
- grind the cracks into a V groove with a dremel
- fill cracks with spray foam
- fill pinholes and final leveling with bondo
- sand smooth
- enlarge vent openings
- apply adhesive to vinyl and dash & wrap vinyl over dash
- trim excess vinyl
- paint to match factory grey
Products used (some may be found cheaper @ local hardware stores)
Dremel 25 pc kit: [ Ссылка ]
or cheaper generic Dremel: [ Ссылка ]
Spreaders: [ Ссылка ]
Dupli-Color Grease & Wax Remover: [ Ссылка ]
Dupli-Color Charcoal Grey Vinyl & Fabric Paint: [ Ссылка ]
Door & Window Spray Foam: [ Ссылка ]
Coping Saw: [ Ссылка ]
Body Filler Cheesegrater File: [ Ссылка ]
Meguiars E-7200 sanding block backing pad: [ Ссылка ]
3M Wetordry Sponge Pad #20: [ Ссылка ]
Rubber Sanding Block: [ Ссылка ]
80 Grit Sand Paper: [ Ссылка ]
80 Grit Sand Paper: [ Ссылка ]
USC Kromate Light Body Filler: [ Ссылка ]
Dupli-Color DAP1694 Sandable Primer: [ Ссылка ]
If this looks like too much work, there are also Dash Caps available:
1979 -1983 Toyota Pickup without Side Defrost Vents: [ Ссылка ]
1984-1986 Toyota Pickup & 4Runner: (long recessed area across dash top) [ Ссылка ]
1987-1988 Toyota Pickup & 4Runner: (smaller curved rectangle area on dash top) [ Ссылка ]
1989-1995 Toyota Pickup & 4Runner: [ Ссылка ]
I don't have Patreon or ask for donations but you can support the channel with some rad gear from my store: [ Ссылка ]
Used OEM Toyota parts for sale from my collection: [ Ссылка ]
Follow Us:
Instagram: 6th_gear
[ Ссылка ]
[ Ссылка ]
![](https://s2.save4k.ru/pic/sw8EmkbezXE/maxresdefault.jpg)