DroneMobile X1 Swapout Video:

Step 1.
Locate and remove your old Drone module and harness. Please note which port on the remote starter/alarm the harness was plugged into.

Step 2
Using the NEW harness included with your X1, connect the new X1 module to your remote starter/alarm by plugging it into the SAME port.

Step 3
Once plugged in, the LEDs on your Drone X1 module will all start to blink. Verify that they are blinking before securing the X1 module.

Step 4
Place the Drone X1 module near your remote starter/alarm, as high up in the dash as possible. Secure it with zip-ties, if available.

Step 5
Go to "Setup" / "Vehicle Info" and update your Serial Number to activate your new X1 Module. All of your vehicle data will be transferred.

For additional support, visit [ Ссылка ]

свернуть