#threeeasywaystomakebows #bowmaking #diybows #messybow #treetopperbow #almostperfectbow #diybowmaking #diy #collaboration #howto #howtomakebows #bowtutorial #bows24

Hello lovebugs! Today we are diying bows. At Home With Lisa Lisa Is A Channel That Will Give You Ideas, Motivate You, Inspire You And Just Have Fun Altogether!

On This Channel We Will Show You All Parts Of Our Home. We Are Going To Take You Along On This Decorating Journey. You Will Also See Diy Projects, Organization And Clean With Me. I Will Also Throw In Some Outfits Of The Day As Well As Some Beauty Vlogs. I Hope These Things Interest You, And If They Do Please Do Not Hesitate To Subscribe And Turn Your Notification Bell On. Please Be So Kind As To Share Us Out.

PLAYLIST: learntodiybows24
[ Ссылка ]

@TheGraceLifeDIYHomeDecor @debbybubbles5301 @designwithemma @jenniferathome @Lifestylesesignswithteresa @thisizaria @ z9designs @thisizaria

DIY Bow Making

#1 Messy Bow
*you will need 3 colors or 3 patterns of ribbon.
cut 2 pieces of each ribbon 20 inches long giving you a total of 6 strips. Next you can dove tail your ribbon ends.
*now take your strips n lay them in cross cross pattern. Next take 1 strip at a time n fold in half n pinch about third way down. Gather all pieces in your hand n use zip tie. Tie as tight as possible. Then pull your ends down circling around the loops. Fluff your loops and now you have a messy bow.

#2 The Almost Perfect Fluffy Bow
*you will need 2.5 inch of wired ribbon, floral wire or chenille stem, stapler, ruler or tape measure n some scissors.

*measure 17 inches for your bow loops. You will need 5 strips of the 17 inch pieces.

*take the ends of each strip and form a circle. Take your stapler n staple on each side to connect the ends. Repeat this step for all 5 strips.

*lay each one down n flatten bc this is the base of your bow. Then cut your wire. Cut extra length if you will be attaching to something.

*to create the bow you are going to take each loop n pinch in the middle. Create a circular pattern when adding each loop. Remember to keep the pinched.

*add floral wire, place in the middle of your bow n flip to tie tight. Fluff n twist to create your bow.

*cut a 10 inch strip of ribbon , straighten it out and fold in half. Wrap around the center of your bow, tie in double knot around the middle of the bow. Fluff any loops that may have gotten squished during this process.

*once the bow is nice n fluffy take some more ribbon and fold at the top and cut your desired length bc this will be the tail of your bow. Flip your bow over and use excess wire to attach it to bow. Cut the ends of the tails and now you have a fluffy bow.

#3 Tree Topper Bow
*you need 2 2.5inch ribbon of 3yards bc you are going to place the ribbon on top of each other. You can use the same pattern or different pattern or colors.

*make 7 6inch loops on each side. That’s 28 loops bc you doubled the ribbon.

*after completing loops, use wire to secure loops and cut . Then fluff loops out. Then use remaining ribbon to cut 7ft tails. You should have four tails. Use wire to include tails in the bow.

*now you have a beautiful Christmas tree topper.

LoveBug Mail:
PO Box 3
Manvel, Texas 77578

CONNECT WITH ME:

IG: @athome_withlisa
GMAIL: ahwithlisa@gmail.com

OTHER CHANNELS TO FOLLOW:
[ Ссылка ]

SHOP WITH ME:
Amazon Store: [ Ссылка ]
[ Ссылка ]

свернуть