Today’s video will be the start of another video series. This series will be on building your own digipeater from A to Z running on this inexpensive Linux device here that is similar to a Raspberry Pi and runs the same Raspbian OS that the Raspberry Pi runs.
[SUPPORT]
If you're finding the videos informative and useful, please consider supporting TC²
[ Ссылка ]
Page with Instructions:
[ Ссылка ]
===Parts Needed====
Please know, I may collect a share of sales or other compensation from the Amazon affiliate links below.
Le Potato "Tater" Computer
[ Ссылка ]
16GB or 32GB microSD Card
[ Ссылка ]
5V 3A Power Supply (I recommend this 3A version over what I mentioned in the video)
[ Ссылка ]
Digirig
[ Ссылка ]
USB-C Cable for Digirig
[ Ссылка ]
-----------------------------------------------------------------------------------
Digirig Cables [Select one for your radio below]
Yaesu FT-100, FT817, FT-857, FT-891, FT-897, FT-817ND, FT897D
[ Ссылка ]
Baofeng (With K1 connector)
[ Ссылка ]
Some Yaesu HTs with 3.5mm TRRS connector
[ Ссылка ]
If you can't find a Digirig cable for you radio, you can see if Mobilinkd has the cable at their website ➡️ [ Ссылка ] and make a converter by following the instructions in my other video here ➡️ [ Ссылка ]
-----------------------------------------------------------------
[OPTIONAL Items]
Case (Any Raspberry Pi 3 case should work)
[ Ссылка ]
Power supply for hooking up to 12V battery
[ Ссылка ]
