Carrying out a D.I.Y diesel injector leak off on Kenny's Ford Mondeo ST TDCi 2.2.
#cars #funny #test
Both the 2.0 & 2.2 Ford TDCi engines are renowned for jnjector issues. With symptoms such as smoke on start-up & a slight miss every so often, Kenny thought this would be a great place to start the diagnosis.
We carry out the D.I.Y leak off test following Delphi's instructions, step by step. Although this isn't specifically an instructional guide, we do run through all the information you need to carry out this simple test yourself, at home.
We managed to get some great feedback from the results courtesy of the Mondeo ST Owner's Club on Facebook too.
Stay tuned for the same test on my (Drew's) Jaguar X-Type (which shares the same 2.0 TDCi as the a standard Mk3 Ford Mondeo)
Follow us on Facebook for behind the scenes access, giveaways & more!
We are now partnered with TGR Motorpsort to give you 10% OFF!
USE CODE: ACCELERATETGR
[ Ссылка ]
Instagram:
@official_accelerate
@drew_accelerate
@ken_accelerate
@tgr_motorsport
Delphi injector leak off pipe procedure:
- Run engine up to operating temperature
- Attach leak off kit to vehicle leak off pipes
- Let engine idle for 2 minutes
- Hold revs steady at 3,800rpm for 30 seconds
- Let engine idle for 30 seconds
- Hold revs steady at 3,800rpm for 30 seconds
- Let engine idle for 30 seconds
- Hold revs steady at 3,800rpm for 30 seconds
- Let engine idle for 30 seconds
- Hold revs steady at 3,800rpm for 30 seconds
- Let engine idle for 30 seconds
- Shut engine off
- Check how much fluid is in each container
Allow 25ml of fuel for every minute of vehicle running, totalling 125ml of fuel to be within tolerance.
25ml x 5 minutes = 125ml (within tolerance)
