Square Taper and Octalink bottom bracket removal detailed procedure. Check out [ Ссылка ] for a closer look at this bottom bracket type
=================
►We cover the tools you need namely ISIS Octalink bottom bracket a half inch drive, an 8mm Allen wrench and a torque wrench focusing on how to use it.
►Breaking the bb free of the bb shell on the drive side is the main challenge. We show you how to get leverage by using a seat post and then a torque wrench and then how to tap the bb shell once the bb unit has been removed.
►Applying grease to the bb shell and bottom bracket itself is demonstrated, then the technique to avoid cross threading the unit in the bb shell.
►Once the bb shell and the bb cartridge are flush the torque needs to be adjusted to tolerance. Choosing the correct setting and how to use the torque wrench properly is covered.
