Email: hbgreatestmachine@163.com
Mob/Wechat/Whatsapp: 008615175186785

The auxiliary equipment for electric galvanized wire production is the annealing device.
Well type resistance furnace is a cycle - operated electric furance for quenching,tempering and annealing of steel parts.It is especially suitable for iron wire recrystallization and annealing.

This furnace is used for heat treatment of metal parts, steel iron wire, etc. at a rated temperature

Equipment introduction:
The furnace is composed of a furnace body, a movable furnace cover and a control system.
1. The furnace shell is welded by section steel and steel plate.
2. The furnace cover is supported by a combination of section steel and guide rails.
3. The heating element adopts the high resistance alloy 0Cr25Al5 produced by Beijing Shougang and is arranged on the side of the furnace.
4. Since the bottom of the furnace is built with high-alumina bricks, the center of the furnace adopts the method of large and small circles, heating inside and outside.
5. The furnace cover adopts hydraulic lifting, and the motor controls automatic walking.
6. The temperature control system adopts PID thyristor control with high precision.

The construction binding wire production line can also be called small electro-galvanized wire production line, and the wire diameter is usually in the range of 0.6-1.2 mm.

The finished wire is low in price, has good flexibility and is not easy to break. It is one of the most ideal binding wires in the construction industry, mainly using low-zinc cold-plated iron wire.

The new small electroplating production line is a pollution-free, energy-saving and environmentally friendly galvanized iron wire production line, including wire arrangement, wire surface cleaning device, electroplating device, air drying device, drying device and wire. The collection device, as well as the pollution-free, energy-saving and environmentally friendly galvanized iron wire proposed by the utility model, proposes a complete wire production line, which can automatically complete the complete production of the wire, including wire feeding, straightening, rust removal, dust removal, galvanizing, and pneumatic Dry, clean and wire. The whole process is fully automatic and does not require labor. Compared with the existing manual mode, it saves time and efficiency. The whole process is pollution-free production, effectively preventing environmental pollution.

Wire take up machine can be divided into normal wire take up machine and elephant trunk wire take up machine.Also can add on line straightening and cutting device to produce construction binding wire directly.

свернуть