Hey guys you’re here with Doug aka The-Real-Link and today we’re going to show you quickly how to replace the Toner and drum rollers in a Canon Multi-Function Laser Printer, Model MF641cdw, 642cdw, 644cdw, or LBP622cdw. Have you already shaken your starter or existing toner, trying to get that list bit of life out of it but now you simply can’t print? Swapping it couldn’t really be easier so here’s how it goes. This video does not focus on after market ink refilling or non-genuine parts so for that, please look elsewhere.
The touch screen will let you continue printing (with possible deg-ra-dation) on toner but after awhile it simply needs replacing and will be indicated on the panel or by your ink monitor menu. So to swap things here are the steps:
1. Power off your printer. Next, open the outer door to the toner tray and pull the tray all the way forward using the blue lever.
2. Ideally pick up a full replacement set of toners and drums so at least if you’re moving from the starter set, you have all levels at full regardless of your color or black and white printing styles. Many programs and print preferences create black by merging all colors through subtraction, or sometimes offer a true black-only mode and so what ink is used can vary substantially.
3. Here, we see Canon’s instructions for toner replacement. Basically lift out the old toner assembly, tear the perforated seal on the new toner (also indicates the up direction), and drop in the new toner assembly. Repeat this process for all color toner packages. Be sure to shake your toner a few times before installation and to replace it into the proper color section in the toner tray.
4. Your laser printer will run for about a minute on the next power up and “Calibrating Toner” will appear on the screen dialog notifications while the machine is heating and aligning.
5. Now you can take your empty toners back to your local office supply store for recycling, credit, or disposal, or mail them back to Canon with information provided on the included instruction card.
That’s it, you should be good to go! If your machine happens to reset it’s network or drivers during this time, simply reinstall them using Canon’s driver package. If you are stuck on the “Waiting for USB” connection prompt, try physically disconnecting your Ethernet / LAN cable from the printer or your computer and communicating through USB or wireless only. For whatever reason I had to do this on my printer but once it reset itself all was fine.
I hope you found this video helpful, informative, and insightful. Should you wish to support my channel, please consider purchasing replacement toner, the printer, or other tech things using my Amazon affiliate links shared in the description, or throughout my channel’s videos. As always, like, comment, and subscribe for more. Thanks for watching!
Support my channel via Amazon links below!
Replacement Toner:
► Canon 054H Black (High Capacity) - [ Ссылка ]
► Canon 054H Black (Regular Capacity) - [ Ссылка ]
► Canon 054 Cyan (High Capacity) - [ Ссылка ]
► Canon 054 Cyan (Regular Capacity) - [ Ссылка ]
► Canon 054 Magenta (High Capacity) - [ Ссылка ]
► Canon 054 Magenta (Regular Capacity) - [ Ссылка ]
► Canon 054 Yellow (High Capacity) - [ Ссылка ]
► Canon 054 Yellow (Regular Capacity) - [ Ссылка ]
The Printer featured in this video:
► Canon MF644cdw Multi-Function Laser Printer, Scanner, Fax: [ Ссылка ]
► USB Cable since it doesn’t come with one! [ Ссылка ]
A more compact version without a scanner:
► Canon LBP622cdw Multi-Function Laser Printer: [ Ссылка ]
► Video shot on a Canon 5D Mark IV kit: [ Ссылка ]
Like, Comment, and Subscribe for more!
