[ Ссылка ]
This video will show you how to program the digital timer that’s included in Intermatic’s RC2163BFE Pool and Spa Combination Control System.
Remember to always follow basic safety precautions when installing and operating this product and associated equipment.
The RC2163BFE features a built-in 24-hour digital timer that turns ON the single speed filter pump for automatic filtration.
TO PROGRAM the digital timer, you may want to first clear all prior settings by pressing the reset port.
To set or change the time of day, hold down the CLOCK key while pressing either the HOUR or MINUTE keys. Continue pressing until you get to the correct number.
To set ON/OFF times, press the TIMER key once to enter into program mode. The display will show “1 ON-- --”. Press the HOUR key and then the MINUTE key to select the desired first ON time. To set the OFF time, press the TIMER key once and the display will show “1 OFF -- --”. Now repeat the previous steps to select the desired OFF time. You can repeat these steps to create schedules for up to eight on and off times.
When programming is done, press the CLOCK key then the SELECT key repeatedly until the indicator bar is above the word “AUTO”.
To review a program, press the TIMER key repeatedly. When done, press the CLOCK key to return to the time of day.
To cancel or change part of a program, press the Timer key repeatedly until the particular ON or OFF time appears. Set the new ON or OFF time.
If you want to override the automatic operation once, pressing the OVR key will turn the equipment ON or OFF. The timer will resume automatic operation with the next opposite setpoint.
To suspend automatic operation permanently, press the SELECT key to move the indicator bar to the desired ON or OFF position. Keep in mind, the timer will not resume automatic operation until the indicator bar is repositioned above the word “AUTO.”
That’s how easy it is to program the BFE’s digital timer.
