Buy the Blue Yeti Mic on Amazon (affiliate link) - [ Ссылка ]

Download Audacity for FREE here - [ Ссылка ]

Learn how to make your voice sound better using Audacity. In this video we’ll take a look at recording and enhancing voice using Audacity. In this video we’ll take a look at the following steps:

Recording Audio - For best results, pick a suitable place for recording, and use a good quality microphone such as the Blue Yeti. If possible, turn off any background noise, such as fans, refrigerators, air conditioners, etc.. Use the gain adjustment on your mic, or the gain sliders in Audacity to set your input levels. Set this so most of your audio is around -12dB. Record your voiceover

Equalizer - After recording the audio, we’ll first apply the equalizer effect. What sounds good is very objective, depending on your audio. In this example, we’ll bring up the high frequencies, over 5000 Hz, and the low frequencies under 100Hz by around 9 dB. We’ll leave the mid range 500 - 4000 Hz at 0 dB

Amplify - Next, we’ll use the amplify effect to bring up overall volume up to 0 dB

Compressor - We’ll next use the compressor to compress the louder parts of our audio, and bring up the volume on the lower parts. We’ll set the threshold at 12 dB, and compress everything above that at a 2:1 or a 3:1 ratio. The Noise Floor adjustment, selects the low volume level, below which the compressor does not effect the audio. This prevents you from unnecessarily amplifying the quiet background sounds. We’ll set this to -50 dB. And last, we’ll bring the compressed peaks back up to 0 dB, and amplify the lower volume parts, to lower the dynamic range of our audio

Normalize - The last step is Normalizing the audio for Final Output. This adjusts the overall volume of your audio. Set this to -1.0 dB if its the only audio in your project, or -3.0 dB if it’s part of a mix.

Applying any combination, or al these filters in Audacity can dramatically improve your audio

MY TOP FINAL CUT PRO PLUGINS:

Final Cut Pro Essentials ToolKit - [ Ссылка ]
mTuber 3 - [ Ссылка ]
mTitle Kinetic - [ Ссылка ]
MoType 2 - [ Ссылка ]
AddMotion - [ Ссылка ]
mTitle Pop - [ Ссылка ]
Keyper - [ Ссылка ]


SERVICES I USE TO MAKE VIDEOS

Artlist.io - [ Ссылка ]
Envato Elements: [ Ссылка ]



DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for your support, so I can continue to provide you with free content each week!

#FCPX #FinalCutPro #LPTGuy

свернуть